année 2014

  • Aide
  • Recherche
  • RSS
  • Google +
  • Facebook
  • Twitter
Laboratoire de thermique énergétique et procédés (LATEP)
PDF

Année 2014

[ACL-14-01] DUTIL Y., ROUSSE D., LASSUE S., ZALEWSKI L., JOULIN A., VIRGONE J., KUZNIK F., JOHANNES K., DUMAS J-P., BEDECARRATS J-P., CASTELL A., CABEZA L-F., 2014, “Modeling phase change materials behavior in building applications: comments on material characterization and model validation”. Renewable Energy 61, 132-135. (EN)

[ACL-14-02] RAMOS M-A., GOMEZ J-M., RENEAUME J-M., 2014, “Simultaneous Optimal Design and Control of an Extractive Distillation System for the Production of Fuel Grade Ethanol using MPCC”. Industrial & Engineering Chemistry Research, Vol. 53, N°2, pp. 752-764.

[ACL-14-03] MARIAS F., CASAJUS C., 2014, "Torrefaction of corn stover in a macro thermobalance. Influence of Operating conditions". Waste and Biomass Valorisation (5), 157-164.

[ACL-14-04] THEVENIN G., POIRIERJ., PRIGENT P., FOURCAULT A., ROBERT-ARNOUIL J-P., EDME E., MARIAS F., DEMARTHON R., 2014, "Modeling and design of a refractory lining for a biomass gasification reactor fed by a plasma toch". Waste and Biomass Valorisation. In Press (DOI10.1007/s12649-014-9292-9).

[ACL-14-05] MARIAS F., DELAGE S., 2014, "Modeling of pyrolysis in a high capacity thermobalance". Canadian Journal of Chemical Engineering.

[ACL-14-06] MARIAS F., DEMARTHON R., BLOAS A., ROBERT-ARNOUIL J-P., NEBBAD F., 2014, "Design of a high temperature reactor fed by a plasma torch for tar conversion: Comparison between CFD modeling and experimental results". In Press (DOI:10.1007/s12649-014-9331-6.).

[ACL-14-07] HORT C., PLATEL V., SOCHARD S., LUENGAS MUNOZ A-T.*, ONDARTS M., REGUER A., BARONA A., ELIAS A., 2014, "A hybrid biological process of indoor air treatment for toluene removal". Journal of the Air & Waste Management Association, 64:12, 1403-1409.

[ACL-14-08] DUMAS J-P., GIBOUT S., ZALEWSKI L., JOHANNES K., FRANQUET E., LASSUE S., BEDECARRATS J-P., KUZNIK F., TITTELAIN P., 2014, "Interpretation of calorimetry experiments to characterise phase change materials". International Journal of Thermal Sciences. 78 48-55

[ACL-14-09] FRANQUET E., GIBOUT S., TITTELEIN P., ZALEWSKI L., DUMAS J-P., 2014, "Experimental and theoretical analysis of a cement mortar containing microencapsulated PCM". Applied Thermal Engineering, 73 32-40.

[ACL-14-10] TITTELEIN P., GIBOUT S., FRANQUET E., JOHANNES K., ZALEWSKI L., KUZNIK F., DUMAS J-P., LASSUE S., BEDECARRATS J-P., DAVID D., 2014, "Simulation of the thermal and energy behaviour of a composite material containing encapsulated-PCM: influence of the thermodynamical modelling". Applied Energy.

[ACL-14-11] PERIER-MUZET M., BEDECARRATS J-P., STOUFFS P., CASTAING-LASVIGNOTTES J., 2014, "Design and dynamic behavior of a cold storage system combined with a solar powered thermoacoustic refrigerator". Applied Thermal Engineering, Volume 68, Issue 1-2, pp.115-124.