Year 2015


[ACL-15-01] SABONI A., ALEXANDRIVA S., KASHEVA M., 2015, “Effects on interface contamination on mass transfer into a spherical bubble”. Journal of Chemical Technology and Metallurgy, 50, 1314-7471.

[ACL-15-02] MUSBAH I., CICERON D., GARCIA F., SABONI A., ALEXANDROVA S., 2015, "Nanofiltration membranes for drinking water production-retention of nitrate ions", Desalination and Water Treatment (in press).

[ACL-15-03] TORRE J-P., HAILLOT D., RIGAL S.*, DICHARRY C., BEDECARRATS J-P., 2015. "1,3 Dioxolane versus tetrahydrofuran as promoters for CO2-hydrate formation: Thermodynamics properties, and kinetics in presence of sodium dodecyl sulfate", Source of the Document Chemical Engineering Science 126, pp. 688-697.

[ACL-15-04] TITTELEIN P., GIBOUT S., FRANQUET E., JOHANNES K., ZALEWSKI L., KUZNIK F., DUMAS J-P., LASSUE S., BEDECARRATS J-P., DAVID D., 2015, "Simulation of the thermal and energy behaviour of a composite material containing encapsulated-PCM: Influence of the thermodynamical modelling", Applied Energy 140, pp. 269-274.

[ACL-15-05] LACH A.*, ANDRE L., LASSIN A., SERIN J-P., CEZAC P., 2015, "A new pitzer parameterization for the binary NaOH-H2O and ternary NaOH-NaCI-H2O and NaOH-LiOH-H2O systems up to NaOH solid salt saturation, from 273.15 to 523.15 K and at saturated vapor pressure", Journal of solution chemistry 44 (7), pp. 1424-1451.

[ACL-15-06] DARDOUR H., MAZOUZ S., RENEAUME J-M., CEZAC P., BOUROUIS M., BELLAGI A., 2015, "Document feasibility limits and perfomanceof an absorption cooling machine using light alkane mixtures", Applied Thermal Engineering 78, pp. 24-29.

[ACL-15-07] GIRARD C., COUTURE F., RENEAUME J-M., CEZAC P., 2015, "Modélisation par homogénéisation d'une colonne d'absorption réactive", Canadian Journal of Chemical Engineering 93 (2), pp. 363-377.

[ACL-15-08] FRANQUET E., PERRIER V., GIBOUT S., BRUEL P., 2015, "Free underexpanded jets in a quiescent medium: A review", Progress in Aerospace Sciences 77, 414, pp. 25-53.

[ACL-15-09] LUENGAS MUNOZ A-T.*, BARONA A., HORT C., PLATEL V., ELIAS A., 2015, "A review of indoor air treatment technologies", Reviews in Environmental Science and Biotechnology 14 (3), pp. 499-522.

[ACL-15-10] MARIAS F., BENZAOUI A., VAXELAIRE J., GELIX F., NICOL F., 2015, "Fate of Nitrogen during Fluidized Incineration of Sewage Sludge. Estimation of NO and N2O Content in the Exhaust Gas", Source of the Document Energy and Fuels 29 (7), pp. 4534-4548.

[ACL-15-11] MARIAS F., SANTACREU S-D., 2015, "Modelling of pyrolysis in a high capacity thermo balance", Canadian Journal of Chemical Engineering 93 (2), pp. 261-275.

[ACL-15-12] GAYOL A., MARTINI R-E., ANDREATTA A-E., LEGIDO J-L, CASAS L., "Experimental and Nitta-Chao model prediction of high pressure density of p-xylene with dialkyl carbonates or n-alkanes", In press.

[ACL-15-13] VIGNAU-LAULHERE J.*, PLAISANCE H., MOCHO P., BIGAY Y., DESAUZIERS V., 2015, "Performance of the Radiello diffusive sampler for formaldehyde measurement: the influence of exposure conditions and ozone interference", Analytical Methods 7 (13), pp. 5497-5503.

[ACL-15-14] DESAUZIER V., BOURDIN D.*, MOCHO P., PLAISANCE H., 2015, "Innovative tools and modelling methodology for impact prediction and assessment of the contribution of materials on idoor air quality", Heritage Science 3 (1), 28.

[ACL-15-15] OLIVIER J., CONRARDY J-B, MAHMOUD A.*, VAXELAIRE J., 2015, "Electro-dewatering of wastewater sludge: an investigation of the relationship between filtrate flow rate and electric current", Water research 82, pp. 66-77.

[ACL-15-16] KALED A., DUTOUR S., PLATEL V., LLUC J., 2015, "Experimental study of a capillary pumped loop for cooling power electronics: response to high amplitude heat load steps", Applied Thermal Engineering 89, 6614, pp. 169-179.

[ACL-15-17] BOUBAKER R.*, PLATEL V., 2015, "Vapor pocket behavior inside the porous wick of a capillary pumped loop for terrestrial application", Applied Thermal Engineering 84, pp. 420-428.

[ACL-15-18] BOUBAKER R.*, PLATEL V., BERGES A., BANCELIN M. HANNEZO E., 2015, "Dynamic model of heat and mass transfer in an unsaturated porous wick of capillary pumped loop", Applied Thermal Engineering 76, pp. 1-8.

[ACL-15-19] BRODU N., SOCHARD S., ANDRIANTSIFERANA C., PIC J-S, MANERO M-H, 2015, "Fixed-bed adsorption of toluene on high silica zeolites: Experiments and mathematical modelling using LDF approximation and a multisite model", Environmental Technology (UK) 36 (14), pp. 1855-1863.

[ACL-15-20] MARIAS F., DEMARTHON R., BLOAS A., ROBERT-ARNOUIL J-P., NEBBAD F., 2015, "Commissioning of a high temperature tar cracking reactor fed by plasma torch: experimental results.", Waste and Biomass Valorisation (6), pp. 97-108.

[ACL-15-21] BOURNEUF S., JACOB M., ALBASI C., SOCHARD S., RICHARD R., MANERO M.H., 2015, "Desorption experiments and modelling of micropollutants on activated carbon in water phase. Application to transient concentrations mitigation.", International Journal of Environmental Science and Technonoly, 13 (1), 1-10.

[ACL-15-22] DESAUZIERS V., BOURDIN D., MOCHO P., PLAISANCE H., "Innovative tools and modeling methodology for impact prediction and assessment of the contribution of materials on idoor air quality", 2015, Heritage Science, 3 (1), art. n°28.

[ACL-15-23] VIGNAU-LAULHERE J., PLAISANCE H., MOCHO P., RAULIN K., BIGAY Y., DESAUZIERS V., "Performance of the Radiello diffusive sampler for formaldehyde measurement: the influence of exposure conditions and ozone interference", 2015, Analytical Methods, 7 (13), pp. 5497-5503.

[ACL-15-24] DUMAS J-P., comments on the article "Crystallization kinetics with nucleation phenomenon: Ice slurry system." by KOUSKSU T., JAMIL A., ARID A. JEGADHEESWARAN S., ZERAOULI Y., 2012, Int. J. Refrigeration, 35,7,1921-1930, Internation Journal of Refrigeration 53 (2015) 206-209.